* fix stacklevels of warnings
* stop using loop arg when calling start_adding_reactions
* [Audio] Stop using loop arg when calling start_adding_reactions
* schema v1
* set hidden to True for shared libs
* fix test data
* add warning about invalid top-level structure
* don't show full traceback for JSONDecodeError
* passing loop to certain things was deprecated. additionally, `asyncio.get_event_loop()` is being deprecated
* awesome, checks are functioning as intended
* fun with fixtures
* we can just stop misuing that anyhow
* Update redbot/pytest/downloader.py
Co-Authored-By: jack1142 <6032823+jack1142@users.noreply.github.com>
Co-authored-by: jack1142 <6032823+jack1142@users.noreply.github.com>
* Update downloader.py
* Update json_mixins.py
* Update installable.py
* changelog pt 1
* changelog pt2
* edit of changelog pt1
* edit of changelog pt 2 (last commit before review)
* Kidding, this is the last one before review.
* feat(downloader): add `[p]cog reinstallreqs` command
* enhance: clear lib folder on minor Python version change
* chore(changelog): add towncrier entries
* enhance: warn user about detected change in OS or arch
* enhance: use actual prefix instead of `[p]`
* Whoops...
Co-Authored-By: Michael H <michael@michaelhall.tech>
* enhance: wrap message sending in try except
Co-authored-by: Michael H <michael@michaelhall.tech>
* feat(downloader): Install cog from specific commit in repo (initial commit)
- Repo and Installable have commit property now
- New class inheriting from Installable -
InstalledCog (old one from converters.py removed)
- New Repo.checkout() method, which is also async ctx manager
ref #2527
* fix(downloader): Keep information about repo's branch in config
- This is needed to make sure that repo can go back from detached state in some rare unexpected
cases
- current branch is determined by `git symbolic-ref` now as this command errors for detached
HEAD
* feat(downloader): Update repo without cogs, update single cog
The most important part of issue #2527 has been added here
- `[p]repo update` command added
- new conf format - nested dictionary repo_name->cog_name->cog_json
installed libraries are now kept in conf too
- `InstalledCog` renamed to `InstalledModule` - installed libraries use this class
- `Downloader.installed_libraries()` and `Downloader.installed_modules()` added
- `Downloader._add_to_installed()` and `Downloader._remove_from_installed()`
now accept list of modules, of both cogs and libraries
- `[p]cog install` tells about fails of copying cog and installing shared libraries
- `[p]cog update` will truly update only chosen cogs (if provided) or cogs that need update
- pinned cogs aren't checked
- before update, repos are updated
- to determine if update is needed `Repo.get_modified_modules()` is used
- `[p]cog pin` and `[p]cog unpin` commands for pinning/unpinning cogs added
- `Repo.checkout()` allows to choose ctx manager exit's checkout revision
- `Repo.install_cog()` returns `InstalledModule` now and raises CopyingError (maybe breaking?)
- `Repo.install_libraries()` returns 2-tuple of installed and failed libraries (maybe breaking?)
- `RepoManager.get_all_cogs()` added, which returns cogs from all repos
- `RepoManager.repos` property added, which contains tuple of `Repo`
* test(downloader): Repo.current_branch() throws an exception, when branch can't be determined
* style(downloader): rename _add_to_installed to _save_to_installed
This method is used for both adding and updating existing modules in Config
* refactor(downloader): add ctx.typing() for few commands
`[p]cog install` is nested hell, can't wait for moving install logic to separate method
* fix(downloader): refactor and fix `set` usage
* perf(downloader): update commits for ALL checked modules to omit diffs next time
This will also disable running git diff for cogs that have the same commit as the latest one
* style(downloader): few style improvements
- use of mutable object in method definition
- make Repo._get_full_sha1() public method
- too long
line
- don't use len to check if sequence is empty
* feat(downloader): add `[p]cog updateallfromrepos` and `[p]cog updatetoversion` commands
- moved cog update logic into `Downloader._cog_update_logic()` (lack of better name)
- splitted
whole cog update process into smaller methods
- might still need some improvements
- added new
methods to `Repo` class:
- `is_on_branch()` to check if repo is currently checked out to branch
- `is_ancestor()` to check if one commit is ancestor of the other
- fix for
`Downloader._available_updates()` behaviour
broken by commit
5755ab08ba67556b3863e907c6f44d80f4f13d88
* feat(downloader): try to find last commit where module is still present
Enhancements:
- `Installable` now has `repo` attribute containing repo object or `None` if repo is
missing
- `Downloader._install_cogs()` and `Downloader._reinstall_libraries()` are able to install
modules from different commits of repo
- `Repo.checkout()` as ctx manager will now exit to commit
which was active before checking out
- unification of `rev` and `hash` terms:
All function
parameters are explicitly called `hash`, if it can only be commit's full sha1 hash or `rev` if it
can be anything that names a commit object, see
[link](https://git-scm.com/docs/git-rev-parse#_specifying_revisions)
- new
`Repo.get_last_module_occurence()` method, which gets module's Installable from last commit in which
it still occurs
* docs(downloader): Add basic description for `InstalledModule`
* fix(downloader): cog ignored during updates if its commit was missing
After config format update, commit string is empty until update and when such cog was checked and it
wasn't available in repo anymore, it was ignored
* refactor(downloader): Installing cogs from specific rev will pin them
* perf(downloader): Don't checkout when current commit equals target hash
- changes to `Repo.checkout()`:
- `exit_to_rev` is now keyword only argument
- added
`force_checkout` to force checkout even if `Repo.commit` value is the same as target hash
* refactor(downloader): Repo._run() stderr is redirected to debug log now
- added two keyword arguments:
- `valid_exit_codes` which specifies valid exit codes, used to
determine if stderr should be sent as debug or error level in logging
- `debug_only` which
specifies if stderr can be sent only as debug level in logging
* style(downloader): stop using `set` as arg name in `_load_repos()`
* feat(downloader): pass multiple cogs to `[p]cog (un)pin`
* refactor(downloader): accept module name instead of instance, fix spelling
* style(downloader): few small style changes
* fix(downloader): add type annotations + fixes based on them
- fix wrong type annotations and add a lot of new ones
- add checks for `Installable.repo` being `None`
- fix wrong return type in `Downloader._install_requirements`
- show repo names correctly when updating all repos
- fix error when some requirement fails to install
BREAKING CHANGE:
- type of `Repo.available_modules` is now consistent (always `tuple`)
* tests: use same event loop policy as in Red's code
* enhance(downloader): fully handle ambiguous revisions
* build(deps): add pytest-mock dependency to tests extra
* fix(downloader): minor fixes
* feat(downloader): add tool for editing Downloader's test repo
This script aims to help update the human-readable version of repo
used for git integration tests in ``redbot/tests/downloader_testrepo.export``
by exporting/importing it in/from provided directory.
Note
----
Editing `downloader_git_test_repo.export` file manually is strongly discouraged,
especially editing any part of commit directives as that causes a change in the commit's hash.
Another problem devs could encounter when trying to manually edit that file
are editors that will use CRLF instead of LF for new line character(s) and therefore break it.
I also used `.gitattributes` to prevent autocrlf from breaking testrepo.
Also, if Git ever changes currently used SHA-1 to SHA-256 we will have to
update old hashes with new ones. But it's a small drawback,
when we can have human-readable version of repo.
Known limitations
-----------------
``git fast-export`` exports commits without GPG signs so this script disables it in repo's config.
This also means devs shouldn't use ``--gpg-sign`` flag in ``git commit`` within the test repo.
* tests(downloader): add git tests and test repo for them
Also added Markdown file that is even more clear than export file
on what the test repo contains.
This is manually created but can be automated on later date.
* test(downloader): add more tests related to RepoManager
These tests use expected output that is already guaranteed by git tests.
* chore(CODEOWNERS): add jack1142 to Downloader's folders
I know this doesn't actually give any benefit to people that don't have
write permission to the repo but I saw other big fella devs doing this,
so I think this might be advisable.
* enhance(downloader): allow easy schema updates in future
* enhance(downloader): more typing fixes, add comments for clarity
* feat(downloader): add python and bot version check to update process
follow-up on #2605, this commit fully fixes#1866
* chore(changelog): add towncrier entries
* fix(downloader): use `*args` instead of `commands.Greedy`
* fix(downloader): hot-reload issue - `InstallableType` now inherits from `IntEnum`
There's desync of `InstallableType` class types due to hot-reload
and `IntEnum` allows for equality check between different types
* enhance(downloader): ensure there's no cog with same name installed
should fix#2927
* fix(downloader): last few changes before marking as ready for review
* fix(core,downloader): add lib folder to sys.path before loading cogs
* chore(changelog): add towncrier entry
* fix(core): always append 3rd-party lib path to the end of `sys.path`
* More privatization, and some error helpers
This makes a lot more things private. Continued from #2967, fixes#2984
Adds public methods for various things.
Below is a brief summary of things available elsewhere, though this
particular set of changes may warrant a detailed section in the release notes.
- bot.db.locale -> redbot.core.i18n.get_locale
- Note: This one already existed.
- bot.db.help -> redbot.core.commands.help.HelpSettings
- bot db whitelist/blaclist? -> bot.allowed_by_whitelist_blacklist
- This has also been made a single cannonical function for this
purpose including check usage
- bot color? -> bot.get_embed_color/bot.get_embed_colour
- bot.id.api_tokens? ->
- bot.get_shared_api_tokens
- bot.set_shared_api_tokens
- bot.remove_shared_api_tokens
-bot.db.prefix -> bot.get_valid_prefixes
- (Note: This is a wrapper around bot.get_prefix)
Other changes include
- removing `bot.counter` as it was never used anywhere
- Adding properties with helpful error messages for moved and renamed
things
- making bot.uptime a property with an error on set
- adding a migration to the bot config for shared_api_tokens
* Remove overly encompassing message redaction, eval is a risk, dont run in dev if you cant manage it
* address Flame's feedback
* rephrase example
* changelog extras
* You saw nothing
* [i18n] Update translation catalogs
Signed-off-by: Toby Harradine <tobyharradine@gmail.com>
* Install redgettext 3.1 in travis crowdin deployment
Last time the catalog templates were updated, redgettext 3.0 was used. I'd rather Travis didn't upload them after extracting with an older version.
Signed-off-by: Toby Harradine <tobyharradine@gmail.com>
