docs: update fork reference in README to include specific commit hash

README.md

@@ -1,16 +1,20 @@
-# 🌱 Auto Garden
+# 🌡️ Raspberry Pi Pico Thermostat
+
+> **Forked from [Auto-Garden](https://gitea.rcs1.top/sickprodigy/Auto-Garden); [Commit c8102e62ee](https://gitea.rcs1.top/sickprodigy/Auto-Garden/commit/c8102e62ee8c3b8cf60a57654bab7703df2f27af)**
+
+> Smart thermostat and climate control system using Raspberry Pi Pico W with web interface, scheduling, and relay control
 
-> Automated climate control system using Raspberry Pi Pico W with web interface and scheduling
 
 ## Recent Updates
 
-- 🆕 **Immediate schedule application:** When resuming scheduling from hold mode, the system now instantly applies the current schedule targets (no delay).
+- 🆕 **Immediate schedule application:** When resuming scheduling from hold mode, the thermostat instantly applies the current schedule targets (no delay).
 - 🆕 **Aggressive memory management:** Garbage collection runs every 5 seconds for improved reliability.
 - 🆕 **Manual hold settings:** `ac_target` and `heater_target` in `config.json` now only store your last manual hold settings, not schedule targets.
 - 🆕 **NTP sync optimization:** NTP modules are loaded only when needed, saving RAM.
 - 🆕 **Temperature validation:** Impossible sensor readings are ignored for safety.
 - 🆕 **Improved config persistence:** All changes are saved and reloaded immediately.
 
+
 ## Features
 
 - **Core Features**
@@ -24,9 +28,8 @@
   - ✅ Graceful shutdown with Ctrl+C
   - ✅ **Aggressive garbage collection for stability**
 
-- **Climate Control**
+- **Thermostat Control**
-  - ✅ Automated AC control with temperature swing logic
+  - ✅ Automated AC and heater control with temperature swing logic
-  - ✅ Automated heater control with separate swing settings
   - ✅ Short-cycle protection for both AC and heater
   - ✅ Dual relay control via opto-coupler for 110V AC
   - ✅ Mutual exclusion (AC and heater never run simultaneously)
@@ -53,6 +56,7 @@
   - ✅ Auto-refresh dashboard (30 seconds)
   - ✅ **Settings and schedule changes are reflected instantly**
 
+
 ## Configuration Notes
 
 - **AC/Heater target settings:**  
@@ -61,7 +65,7 @@
   - This ensures the config file always reflects the current operating temperatures, whether in hold mode or schedule mode.
 
 - **Immediate schedule application:**  
-  - When you click "Resume Scheduling," the system applies the current schedule targets instantly, so the dashboard updates without delay.
+  - When you click "Resume Scheduling," the thermostat applies the current schedule targets instantly, so the dashboard updates without delay.
 
 - **Memory management:**  
   - Garbage collection runs every 5 seconds to prevent memory fragmentation and crashes.
@@ -69,6 +73,7 @@
 - **Sensor validation:**  
   - Temperatures outside the range -50°F to 150°F are ignored to prevent false readings.
 
+
 ## Quick Start
 
 ### 1. Hardware Setup
@@ -146,56 +151,28 @@ RUN pin  →  Button  →  GND
 
 ### 4. Configuration
 
-**Create `secrets.py`** (copy from `secrets.example.py`):
+**Edit `config.json`** (created automatically on first boot, or edit manually):
 
-```python
+```json
-secrets = {
-    'ssid': 'YOUR_WIFI_NAME',
-    'password': 'YOUR_WIFI_PASSWORD',
-    'discord_webhook_url': 'https://discord.com/api/webhooks/...',
-    'discord_alert_webhook_url': 'https://discord.com/api/webhooks/...',
-}
-```
-
-**Sensor Configuration in `main.py`:**
-
-```python
-# Sensor configuration
-SENSOR_CONFIG = {
-    'inside': {
-        'pin': 10,
-        'label': 'Inside',
-        'alert_high': 80.0,
-        'alert_low': 70.0
-    },
-    'outside': {
-        'pin': 11,
-        'label': 'Outside',
-        'alert_high': 85.0,
-        'alert_low': 68.0
-    }
-}
-```
-
-**Default Climate Settings (auto-saved to config.json):**
-
-```python
-# Default config (created on first boot)
 {
-    "ac_target": 77.0,           # AC target temperature (°F)
+    "ssid": "YOUR_WIFI_NAME",
-    "ac_swing": 1.0,             # AC turns on at 78°F, off at 76°F
+    "password": "YOUR_WIFI_PASSWORD",
-    "heater_target": 72.0,       # Heater target temperature (°F)
+    "discord_webhook_url": "https://discord.com/api/webhooks/...",
-    "heater_swing": 2.0,         # Heater turns on at 70°F, off at 74°F
+    "discord_alert_webhook_url": "https://discord.com/api/webhooks/...",
-    "temp_hold_duration": 3600,  # Temporary hold lasts 1 hour (3600 seconds)
+    "ac_target": 77.0,
-    "schedule_enabled": true,    # Schedules active by default
+    "ac_swing": 1.0,
-    "schedules": [               # 4 time-based schedules
+    "heater_target": 72.0,
+    "heater_swing": 2.0,
+    "temp_hold_duration": 3600,
+    "schedule_enabled": true,
+    "schedules": [
         {
             "time": "06:00",
             "name": "Morning",
             "ac_target": 75.0,
             "heater_target": 72.0
-        },
+        }
-        # ... 3 more schedules
+        // ... 3 more schedules
     ]
 }
 ```
@@ -204,12 +181,11 @@ All settings can be changed via the web interface and persist through reboots.
 
 ### 5. Upload & Run
 
-Upload all files to your Pico:
+**Upload all files to your Pico:**
 
 ```text
-/
+/ 
 ├── main.py
-├── secrets.py
 ├── config.json              # Auto-generated on first boot
 └── scripts/
     ├── air_conditioning.py   # AC/Heater controller classes
@@ -223,24 +199,24 @@ Upload all files to your Pico:
 
 The Pico will auto-start `main.py` on boot and be accessible at **<http://192.168.x.x>**
 
+
 ## Project Structure
 
 ```text
-Auto-Garden/
+Raspberry-Pi-Pico-Thermostat/
 ├── main.py                      # Entry point, configuration, system initialization
-├── secrets.py                   # WiFi & Discord credentials (gitignored)
+├── config.json                  # Persistent configuration and credentials (auto-generated)
-├── secrets.example.py           # Template for secrets.py
-├── config.json                  # Persistent configuration (auto-generated)
 └── scripts/
-    ├── air_conditioning.py      # AC & Heater controllers with short-cycle protection
+  ├── air_conditioning.py      # AC & Heater controllers with short-cycle protection
-    ├── discord_webhook.py       # Discord notification handling
+  ├── discord_webhook.py       # Discord notification handling
-    ├── monitors.py              # Monitor base class & implementations
+  ├── monitors.py              # Monitor base class & implementations
-    ├── networking.py            # WiFi connection management
+  ├── networking.py            # WiFi connection management
-    ├── scheduler.py             # Schedule system with temporary/permanent hold modes
+  ├── scheduler.py             # Schedule system with temporary/permanent hold modes
-    ├── temperature_sensor.py    # DS18B20 sensor interface
+  ├── temperature_sensor.py    # DS18B20 sensor interface
-    └── web_server.py            # Web interface for monitoring and control
+  └── web_server.py            # Web interface for monitoring and control
 ```
 
+
 ## How It Works
 
 ### Temperature Monitoring
@@ -354,6 +330,7 @@ Access at **<http://192.168.x.x>**
 - **Auto-reconnect:** Attempts every 60 seconds if disconnected
 - **Static IP:** Always accessible at <http://192.168.x.x>
 
+
 ## Temperature Logs
 
 Logs are saved to `/temp_logs.csv` on the Pico:
@@ -365,6 +342,7 @@ Logs are saved to `/temp_logs.csv` on the Pico:
 
 Format: `timestamp,location,sensor_id,temperature_f`
 
+
 ## Customization
 
 ### Via Web Interface (Recommended)
@@ -405,6 +383,7 @@ check_interval=10      # Temperature check frequency
 report_interval=30     # Discord report frequency
 ```
 
+
 ## Safety Notes
 
 ⚠️ **High Voltage Warning:**
@@ -429,6 +408,7 @@ report_interval=30     # Discord report frequency
 - Hold modes reset on reboot (schedules always resume)
 - Static IP ensures web interface always accessible
 
+
 ## Troubleshooting
 
 **Web interface not loading:**
@@ -447,14 +427,14 @@ report_interval=30     # Discord report frequency
 
 **WiFi not connecting:**
 
-- Verify SSID/password in `secrets.py`
+- Verify SSID/password in `config.json`
 - Check 2.4GHz WiFi (Pico W doesn't support 5GHz)
 - LED should be solid when connected
 - Check serial console for connection status
 
 **Discord messages not sending:**
 
-- Verify webhook URLs in `secrets.py`
+- Verify webhook URLs in `config.json`
 - Test webhooks with curl/Postman first
 - Check Pico has internet access (ping test)
 - Look for error messages in serial console
@@ -501,14 +481,17 @@ report_interval=30     # Discord report frequency
 - Ensure config.json has write permissions
 - Try manual edit of config.json and reboot
 
+
 ## Contributing
 
 Feel free to open issues or submit pull requests for improvements!
 
+
 ## License
 
 MIT License - See LICENSE file for details
 
+
 ## Resources
 
 - [Raspberry Pi Pico W Documentation](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html)