156 lines
4.8 KiB
Python
156 lines
4.8 KiB
Python
from machine import Pin
|
|
import time
|
|
import network
|
|
|
|
# Initialize pins (LED light onboard)
|
|
led = Pin("LED", Pin.OUT)
|
|
led.low()
|
|
|
|
# Hard reset WiFi interface before connecting
|
|
print("Initializing WiFi...")
|
|
try:
|
|
wlan = network.WLAN(network.STA_IF)
|
|
wlan.deinit()
|
|
time.sleep(2)
|
|
print("WiFi interface reset complete")
|
|
except Exception as e:
|
|
print(f"WiFi reset warning: {e}")
|
|
|
|
# Import after WiFi reset
|
|
from scripts.networking import connect_wifi
|
|
from scripts.discord_webhook import send_discord_message
|
|
from scripts.monitors import TemperatureMonitor, WiFiMonitor, ACMonitor, HeaterMonitor, run_monitors
|
|
from scripts.temperature_sensor import TemperatureSensor
|
|
from scripts.air_conditioning import ACController
|
|
from scripts.heating import HeaterController
|
|
from scripts.web_server import TempWebServer
|
|
|
|
# Connect to WiFi
|
|
wifi = connect_wifi(led)
|
|
|
|
# Set static IP and print WiFi details
|
|
if wifi and wifi.isconnected():
|
|
# Configure static IP
|
|
static_ip = '192.168.86.43' # Your desired static IP
|
|
subnet = '255.255.255.0' # Subnet mask (usually this)
|
|
gateway = '192.168.86.1' # Your router's IP
|
|
dns = '192.168.86.1' # DNS server (usually same as gateway)
|
|
|
|
wifi.ifconfig((static_ip, subnet, gateway, dns))
|
|
time.sleep(1)
|
|
|
|
# Print WiFi details
|
|
ifconfig = wifi.ifconfig()
|
|
print("\n" + "="*50)
|
|
print("WiFi Connected Successfully!")
|
|
print("="*50)
|
|
print(f"IP Address: {ifconfig[0]}")
|
|
print(f"Subnet Mask: {ifconfig[1]}")
|
|
print(f"Gateway: {ifconfig[2]}")
|
|
print(f"DNS Server: {ifconfig[3]}")
|
|
print(f"Web Interface: http://{ifconfig[0]}")
|
|
print("="*50 + "\n")
|
|
|
|
# Send startup message with IP
|
|
send_discord_message(f"Pico W online at http://{ifconfig[0]} ✅")
|
|
else:
|
|
print("\n" + "="*50)
|
|
print("WiFi Connection Failed!")
|
|
print("="*50 + "\n")
|
|
|
|
# Start web server
|
|
web_server = TempWebServer(port=80)
|
|
web_server.start()
|
|
|
|
# Sensor configuration registry (moved from temperature_sensor.py)
|
|
SENSOR_CONFIG = {
|
|
'inside': {
|
|
'pin': 10,
|
|
'label': 'Inside',
|
|
'alert_high': 80.0,
|
|
'alert_low': 70.0
|
|
},
|
|
'outside': {
|
|
'pin': 11,
|
|
'label': 'Outside',
|
|
'alert_high': 85.0,
|
|
'alert_low': 68.0
|
|
}
|
|
}
|
|
|
|
# Initialize sensors based on configuration
|
|
def get_configured_sensors():
|
|
"""Return dictionary of configured sensor instances."""
|
|
sensors = {}
|
|
for key, config in SENSOR_CONFIG.items():
|
|
sensors[key] = TemperatureSensor(pin=config['pin'], label=config['label'])
|
|
return sensors
|
|
|
|
# Get configured sensors
|
|
sensors = get_configured_sensors()
|
|
|
|
# AC Controller options
|
|
ac_controller = ACController(
|
|
relay_pin=15,
|
|
min_run_time=30, # min run time in seconds
|
|
min_off_time=5 # min off time in seconds
|
|
)
|
|
|
|
ac_monitor = ACMonitor(
|
|
ac_controller=ac_controller,
|
|
temp_sensor=sensors['inside'],
|
|
target_temp=77.0, # target temperature in Fahrenheit
|
|
temp_swing=1.0, # temp swing target_temp-temp_swing to target_temp+temp_swing
|
|
interval=30 # check temp every x seconds
|
|
)
|
|
|
|
# Heater Controller options
|
|
heater_controller = HeaterController(
|
|
relay_pin=16,
|
|
min_run_time=30, # min run time in seconds
|
|
min_off_time=5 # min off time in seconds
|
|
)
|
|
|
|
heater_monitor = HeaterMonitor(
|
|
heater_controller=heater_controller,
|
|
temp_sensor=sensors['inside'],
|
|
target_temp=80.0, # target temperature in Fahrenheit
|
|
temp_swing=2.0, # temp swing
|
|
interval=30 # check temp every x seconds
|
|
)
|
|
|
|
# Set up monitors
|
|
monitors = [
|
|
WiFiMonitor(wifi, led, interval=5, reconnect_cooldown=60), # Wifi monitor, Check WiFi every 5s
|
|
ac_monitor, # AC monitor
|
|
heater_monitor, # Heater monitor
|
|
TemperatureMonitor( # Inside temperature monitor
|
|
sensor=sensors['inside'],
|
|
label=SENSOR_CONFIG['inside']['label'],
|
|
check_interval=10, # Check temp every 10 seconds
|
|
report_interval=30, # Report/log every 30 seconds
|
|
alert_high=SENSOR_CONFIG['inside']['alert_high'],
|
|
alert_low=SENSOR_CONFIG['inside']['alert_low'],
|
|
log_file="/temp_logs.csv",
|
|
send_alerts_to_separate_channel=True
|
|
),
|
|
TemperatureMonitor( # Outside temperature monitor
|
|
sensor=sensors['outside'],
|
|
label=SENSOR_CONFIG['outside']['label'],
|
|
check_interval=10, # Check temp every 10 seconds
|
|
report_interval=30, # Report/log every 30 seconds
|
|
alert_high=SENSOR_CONFIG['outside']['alert_high'],
|
|
alert_low=SENSOR_CONFIG['outside']['alert_low'],
|
|
log_file="/temp_logs.csv",
|
|
send_alerts_to_separate_channel=False
|
|
),
|
|
]
|
|
|
|
print("Starting monitoring loop...")
|
|
print("Press Ctrl+C to stop\n")
|
|
|
|
# Main monitoring loop
|
|
while True:
|
|
run_monitors(monitors)
|
|
web_server.check_requests(sensors, ac_monitor, heater_monitor)
|
|
time.sleep(0.1) |