Add schedule management to web server and configuration loading

main.py

@@ -1,6 +1,7 @@
 from machine import Pin
 import time
 import network
+import json
 
 # Initialize pins (LED light onboard)
 led = Pin("LED", Pin.OUT)
@@ -24,6 +25,29 @@ from scripts.temperature_sensor import TemperatureSensor
 from scripts.air_conditioning import ACController
 from scripts.heating import HeaterController
 from scripts.web_server import TempWebServer
+from scripts.scheduler import ScheduleMonitor
+
+# Load saved settings from file
+def load_config():
+    """Load configuration from config.json file."""
+    try:
+        with open('config.json', 'r') as f:
+            config = json.load(f)
+            print("Loaded saved settings from config.json")
+            return config
+    except:
+        print("No saved config found, using defaults")
+        return {
+            'ac_target': 77.0,
+            'ac_swing': 1.0,
+            'heater_target': 80.0,
+            'heater_swing': 2.0,
+            'schedules': [],
+            'schedule_enabled': False
+        }
+
+# Load configuration
+config = load_config()
 
 # Connect to WiFi
 wifi = connect_wifi(led)
@@ -31,10 +55,10 @@ wifi = connect_wifi(led)
 # Set static IP and print WiFi details
 if wifi and wifi.isconnected():
     # Configure static IP
-    static_ip = '192.168.86.43'      # Your desired static IP
-    subnet = '255.255.255.0'         # Subnet mask (usually this)
-    gateway = '192.168.86.1'          # Your router's IP
-    dns = '192.168.86.1'              # DNS server (usually same as gateway)
+    static_ip = '192.168.86.43'
+    subnet = '255.255.255.0'
+    gateway = '192.168.86.1'
+    dns = '192.168.86.1'
     
     wifi.ifconfig((static_ip, subnet, gateway, dns))
     time.sleep(1)
@@ -62,7 +86,7 @@ else:
 web_server = TempWebServer(port=80)
 web_server.start()
 
-# Sensor configuration registry (moved from temperature_sensor.py)
+# Sensor configuration registry
 SENSOR_CONFIG = {
     'inside': {
         'pin': 10,
@@ -92,53 +116,75 @@ sensors = get_configured_sensors()
 # AC Controller options
 ac_controller = ACController(
     relay_pin=15,
-    min_run_time=30,   # min run time in seconds
-    min_off_time=5     # min off time in seconds
+    min_run_time=30,
+    min_off_time=5
 )
 
+# Use loaded config values for AC monitor
 ac_monitor = ACMonitor(
     ac_controller=ac_controller,
     temp_sensor=sensors['inside'],
-    target_temp=77.0,   # target temperature in Fahrenheit
-    temp_swing=1.0,     # temp swing target_temp-temp_swing to target_temp+temp_swing
-    interval=30         # check temp every x seconds
+    target_temp=config['ac_target'],
+    temp_swing=config['ac_swing'],
+    interval=30
 )
 
 # Heater Controller options
 heater_controller = HeaterController(
     relay_pin=16,
-    min_run_time=30,   # min run time in seconds
-    min_off_time=5     # min off time in seconds
+    min_run_time=30,
+    min_off_time=5
 )
 
+# Use loaded config values for heater monitor
 heater_monitor = HeaterMonitor(
     heater_controller=heater_controller,
     temp_sensor=sensors['inside'],
-    target_temp=80.0,   # target temperature in Fahrenheit
-    temp_swing=2.0,     # temp swing
-    interval=30         # check temp every x seconds
+    target_temp=config['heater_target'],
+    temp_swing=config['heater_swing'],
+    interval=30
 )
 
+# Create schedule monitor
+schedule_monitor = ScheduleMonitor(
+    ac_monitor=ac_monitor,
+    heater_monitor=heater_monitor,
+    config=config,
+    interval=60  # Check schedule every 60 seconds
+)
+
+# Print loaded settings
+print("\n" + "="*50)
+print("Current Climate Control Settings:")
+print("="*50)
+print(f"AC Target:      {config['ac_target']}°F ± {config['ac_swing']}°F")
+print(f"Heater Target:  {config['heater_target']}°F ± {config['heater_swing']}°F")
+print(f"Schedule:       {'Enabled' if config.get('schedule_enabled') else 'Disabled'}")
+if config.get('schedules'):
+    print(f"Schedules:      {len(config.get('schedules', []))} configured")
+print("="*50 + "\n")
+
 # Set up monitors
 monitors = [
-    WiFiMonitor(wifi, led, interval=5, reconnect_cooldown=60), # Wifi monitor, Check WiFi every 5s
-    ac_monitor, # AC monitor
-    heater_monitor, # Heater monitor
-    TemperatureMonitor( # Inside temperature monitor
+    WiFiMonitor(wifi, led, interval=5, reconnect_cooldown=60),
+    schedule_monitor,  # Add schedule monitor
+    ac_monitor,
+    heater_monitor,
+    TemperatureMonitor(
         sensor=sensors['inside'],
         label=SENSOR_CONFIG['inside']['label'],
-        check_interval=10,      # Check temp every 10 seconds
-        report_interval=30,     # Report/log every 30 seconds
+        check_interval=10,
+        report_interval=30,
         alert_high=SENSOR_CONFIG['inside']['alert_high'],
         alert_low=SENSOR_CONFIG['inside']['alert_low'],
         log_file="/temp_logs.csv",
         send_alerts_to_separate_channel=True
     ),
-    TemperatureMonitor( # Outside temperature monitor
+    TemperatureMonitor(
         sensor=sensors['outside'],
         label=SENSOR_CONFIG['outside']['label'],
-        check_interval=10,      # Check temp every 10 seconds
-        report_interval=30,     # Report/log every 30 seconds
+        check_interval=10,
+        report_interval=30,
         alert_high=SENSOR_CONFIG['outside']['alert_high'],
         alert_low=SENSOR_CONFIG['outside']['alert_low'],
         log_file="/temp_logs.csv",